The systems are based on the ANT + standard, therefore the sensors of the ROX 10.0 GPS and ROX GPS 11.0 can be connected to the ROX 12.0 SPORT.

ANT + sensors from other manufacturers can be connected to the ROX 12.0.

To perform a firmware update, please proceed as follows:

1. Start your ROX 12.0 SPORT

2. Make sure that you are connected to a Wifi network

3. Connect your ROX 12.0 SPORT to a power adapter using the micro USB cable

4. Now wait a few minutes for the update to load in the background (an arrow appears next to the time display)

5. Confirm the message "New software update available" with the green button "Now"

6. Then wait until the installation has been completed and the ROX 12.0 SPORT is restarted

To do this, select: “My Activities” -> “Select one” -> “Options (start as track)” -> “Options” -> “Save as Track”.

The ROX12.0 SPORT calculates the current speed using GPS. Alternatively, an ANT+ speed transmitter can be used for this purpose. Moreover, it is possible to link an ANT+ heart rate transmitter and an ANT+ cadence transmitter.

In addition to SIGMA's own brackets, third-party brackets marked "K-EDGE" can also be used.

The brackets ROX 11.0 GPS, ROX 7.0 GPS and Pure GPS are compatible with the ROX12.0 SPORT.

The SIGMA CLOUD transfers your activities, sports profiles, tracks and device settings.

Maps of the following countries can be expanded: Africa, Asia, Europe, North America, Oceania and South America. External third-party maps are not expandable.

Yes, please open the settings -> "Map" -> "Map Orientation"

Since the use of GPSies is only possible online, you need access to a guest Wi-Fi or a hotspot.

Drag the tracks you want to transfer from the removable medium to the Tracks folder. You can also transfer tracks via the SIGMA DATA CENTER to your ROX12.0 SPORT.

The display can be switched off while driving. Navigation and turn-by-turn instructions are still active. A complete switch off is not possible.

Yes, but note that it has 5V and 1A.

The distance to the destination is further away than 300 kilometres.

To display watts values, a power meter is necessary.

The maximum length of your password may be 25 characters. The following special characters cannot be used: "\ |"

The use of both programmes is free of charge.
The SIGMA LINK app can be downloaded from the Google Play Store and the IOS App Store.
The SIGMA DATA CENTER can also be downloaded free of charge at www.sigma-download.com.

In general, every microSD card is compatible with the ROX 12.0. Since there are great differences in quality, some mircoSD cards can cause problems. We have created a list of microSD cards that we have tested.

IMPORTANT: To ensure the proper functioning of the microSD card, it must first be formatted as FAT32 (NTFS or exFAT is not recognised by the ROX12)! 128 GB memory cards must be formatted with the cluster size 64 KB!
When using "slow" memory cards and memory cards larger than 32 GB, the starting time of the ROX 12.0 is extended!

• AGFA microSDHC 4 GB
• Kingston microSDHC 8 GB, Class 4
• Lxsino 32GB 32G Ultra microSDHC, Class 10
• Samsung EVO Plus microSDHC 32 GB, up to 95 MB/s, Class 10 U1 memory card
• Samsung EVO SDHC 32 GB, Class 10 U1
• SanDisk Ultra 16 GB microSDHC memory card, Class 10 U1, A1, FFP
• SanDisk Ultra 32 GB microSDHC, Class 10 U1, A1
• SanDisk Ultra 64 GB microSDHC, Class 10 U1, A1
• SanDisk Ultra 128 GB microSDHC, Class 10 U1, A1
• Transcend TS16GUSDCU1, Class 10 Premium microSDHC 16 GB memory card UHS-I
• Transcend, Class 10 Premium microSDHC 32 GB memory card UHS-I
• TPSON 32 GB microSD card, microSDHC memory card, Class 10 UHS-I
• Verbatim 8Gb Adapter, Class 10

PS: We will test more cards and add them to the list!